Dishwasher displays error code i30

Issue

• Dishwasher displays error code i30

Applies to

• Dishwasher

Solution

The anti-flood device is on, caused by water collecting in the base of the appliance.

If the machine is a new installation

Check the inlet hose position is correct and the hose is not kinked or twisted

Inlet Hose

Check the water inlet hose for signs of damage

If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose.

Without electrical power, the water protection system is not active. In this case there is a risk of flooding.

Inlet water supply

The water pressure must be in the limits indicated below

• Water pressure: 1000 kPa max - 50 kPa min.
• Water flow rate 10 L / minute min.
• If water pressure is in excess of 1000 kPa, a pressure reducing valve should be used. Check for leaks.
• If water temperature is in excess of 60° C, a tempering valve should be used. Check for leaks.

Contact an Authorized Service Centre.

If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.

Important: Ensure you close the water tap.