How to clean and maintain your AEG dishwasher
Issue
How to clean and maintain your dishwasher
Applies to
- Dishwasher
Solution
Clean your dishwasher regularly so it continues to perform optimally.
Important: Before any maintenance other than running the programme Machine Care, deactivate the appliance and disconnect the mains plug from the main socket.
Clean the rubber gasket
Clean the filters
Clean the spray arms
Clean the spray arms regularly to prevent clogging the holes.
Start the Machine Care programme with a descaler designed for dishwashers.
This programme is designed to clean the inside of the appliance effectively and efficiently. It removes limescale and grease buildup.
The programme should be run at least once every 2 months with a descaler or a cleaning product designed for dishwashers and without any load.
Was this article helpful?
Related Articles
- Dishwasher - Why should I use Rinse Aid?
- AEG Dishwasher leaking
- Internal light in the dishwasher is not working
- Water in brand new dishwasher
- Dishwasher comfort lift basket stuck in the UPPER position
- Dishwasher does not switch on, no light on the control panel
- Dishwasher door does not close
- Dishwasher short-circuits, burns out fuses or trips RCD circuit breakers
- Too much foam in the dishwasher during or after finish of the cycle
- Water is flowing back into the dishwasher
Related Articles
- Dishwasher - Why should I use Rinse Aid?
- AEG Dishwasher leaking
- Internal light in the dishwasher is not working
- Water in brand new dishwasher
- Dishwasher comfort lift basket stuck in the UPPER position
- Dishwasher does not switch on, no light on the control panel
- Dishwasher door does not close
- Dishwasher short-circuits, burns out fuses or trips RCD circuit breakers
- Too much foam in the dishwasher during or after finish of the cycle
- Water is flowing back into the dishwasher