Dishwasher displays error code i40
Issue
- Dishwasher displays error code i40
Applies to
- Dishwasher
Solution
Before any maintenance other than running the programme Machine Care, turn off the appliance and empty
Drain hose
- Make sure that the sink spigot is not clogged.
- Make sure that the filter in the outlet hose is not clogged.
- Make sure that the drain hose has no kinks or bends.
- Make sure that the interior filter system is not clogged.
Filters and sump
- Clean all the filters
- Clear any foam/suds from the sump
If the next wash programme cycle operates normally, the problem has been resolved.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
Was this article helpful?
Related Articles
- Dishwasher door drops down or opens by itself
- Dishwasher does not turn on/ will not start but the power is on
- Discoloration of silver or aluminium items after washing in the dishwasher
- Dishwasher baskets or spray arms are discolored
- How to clean and maintain your AEG dishwasher
- Dishwasher detergent dispenser does not fully open or does not open
- Dishwasher displays error message i10 or i11, does not fill with water
- Dishwasher displays error code i30
- Dishwasher displays error code i60
- Dishwasher does not dry or dries poorly
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.