Dishwasher leaves white-coloured stripes or bluish coating on glass and crockery
Issue
- The dishwasher leaves white-coloured stripes or a bluish coating on the glass and crockery
Applies to
- Dishwasher
Solution
Resolution:
The rinse aid helps to dry the dishes without streaks and stains.
The rinse aid is automatically released during the hot rinse phase.
When rinse aid chamber is empty, the rinse aid indicator is turned on notifying to refill rinse aid.
If the drying results are satisfactory while using multi-tablets only, it is possible to deactivate the notification for refilling rinse aid.
However, for best drying performance, always use rinse aid. If standard detergent or multi-tablets without rinse aid are used, activate the notification to keep the rinse aid refill indicator active.
Refer to the user manual for settings instruction.
Was this article helpful?
Related Articles
- How to stack your dishwasher for best results | AEG Video
- Unpleasant odour from the dishwasher
- How to load and unload the dishwasher?
- Dishwasher Tablets Do Not Fully Dissolve / Left In the Base
- Dishwasher not cleaning properly
- Dishwasher leaves white residue on dishes and cutlery
- Dishwasher is not heating up water
- Dishwasher door will not close properly or is crooked
- Dishwasher does not / will not start but the power is on
- Dishwasher does not dry or dries poorly