Error PF - Dishwasher cycle stopped and or won't start

Issue

Error PF displayed the program selection bar

Applies to

• Dishwasher

Solution

Error Code - PF

Possible cause

Power supply is out of the operating range. The wash cycle is temporarily interrupted and resumes automatically once the power is restored.

• The electronic board makes sure the dishwasher operates within certain voltage limits. If during the cycle the voltage is outside the limits, the electronic board suspends all loads and interrupts the cycle. The ‘PF’ alarm is triggered.
• The lowest main voltage threshold is 173 Volt and the highest is 278 Volt.
• If the supply voltage goes back within the limits, the electronic board cancels the error status and the cycle resumes.