Water in brand new dishwasher
Issue
Water in brand new dishwasher.
Applies to
- Dishwasher
Solution
During installation or before first use you may observe some water in the machine. This is a residual water left in the machine after a full functional test in the factory to ensure the machine is delivered to customers in perfect working order and is no cause for concern.
Was this article helpful?
Related Articles
- How to clean and maintain your AEG dishwasher
- Dishwasher detergent dispenser does not fully open or does not open
- How does the AirDry function in dishwashers work
- Dishwasher - Why should I use Rinse Aid?
- AEG Dishwasher leaking
- Internal light in the dishwasher is not working
- Dishwasher comfort lift basket stuck in the UPPER position
- Dishwasher does not switch on, no light on the control panel
- Dishwasher door does not close
- Dishwasher short-circuits, burns out fuses or trips RCD circuit breakers
Related Articles
- How to clean and maintain your AEG dishwasher
- Dishwasher detergent dispenser does not fully open or does not open
- How does the AirDry function in dishwashers work
- Dishwasher - Why should I use Rinse Aid?
- AEG Dishwasher leaking
- Internal light in the dishwasher is not working
- Dishwasher comfort lift basket stuck in the UPPER position
- Dishwasher does not switch on, no light on the control panel
- Dishwasher door does not close
- Dishwasher short-circuits, burns out fuses or trips RCD circuit breakers