How to deactivate AirDry on your dishwasher

Issue

• How to deactivate/turn off AirDry on dishwasher

Applies to

• Freestanding Dishwasher

Solution

Activation or deactivation of AirDry

Setting is available in 'user mode' to activation or deactivate AirDry.

As the appliance stores the saved settings, there is no need to configure it before every cycle.

After turning on, the appliance is in 'programme selection' mode by default.

To enter user mode, make sure the appliance is in 'programme selection' mode.

To enter user mode, press and hold simultaneously Delay and Option until the indicators ECO and 160 min flash and the display is blank.

1. Press Start

• The indicato160 min still flashes.

• The remaining indicators are off.

• The display shows the current setting:

- O o = AirDry deactivated

- 1 o = AirDry activated.

2. Press Start to change the setting.

3. Press the on/off button to confirm the setting.

Note: AirDry is not available for very short cycles. Refer to Programme table in the user manual to check which programmes have AirDry feature

The AirDry function automatically opens the dishwasher's door by 10 cm during the last stages of dish programmes to dry your dishes in a more energy-smart and natural way. Now your dishes can be completely dry and spotless at a lower energy cost.

Below you will see a short video on how AirDry works.

For detailed description of your dishwasher settings and recommendations please refer to the user manual supplied with your appliance

Download the user manual