Program not starting and cycle indicator light flashing on dishwasher
Issue
- Cycle indicator light is flashing on the dishwasher
- Program not starting in dishwasher
Applies to
- Dishwasher
Solution
Before starting the appliance always check if:
- The filters are clean and correctly installed.
- The spray arms are not clogged and can move freely.
- There is enough rinse aid.
- The arrangement of the items in the baskets is correct.
- The programme is suitable for the type of load and the degree of soil.
- The correct quantity of detergent is used.
If the dishwasher LED is flashing and the programme is not starting:
1. Make sure that the appliance door is fully closed. An audible click should be heard.
2. If the delay start is set, cancel the setting or wait for the end of the countdown.
3. Press and hold the RESET / CANCEL button(s) (normally highlighted on the panel) which should abort the cycle and drain the appliance.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Centre.
Was this article helpful?
Related Articles
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme
- Dishwasher displays error code I20 or F2 or beeps twice, not draining
- Discoloration of silver or aluminium items after washing in the dishwasher
- How to set the programme with QuickSelect on your AEG dishwasher - Video
- Dishwasher drain hose extension
- How to clean and maintain your AEG dishwasher
- Dishwasher detergent dispenser does not fully open or does not open
- How does the AirDry function in dishwashers work
- Dishwasher - Why should I use Rinse Aid?
- AEG Dishwasher leaking
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.
Related Articles
- Dishwasher is stuck mid-cycle and won't allow me to select a different programme
- Dishwasher displays error code I20 or F2 or beeps twice, not draining
- Discoloration of silver or aluminium items after washing in the dishwasher
- How to set the programme with QuickSelect on your AEG dishwasher - Video
- Dishwasher drain hose extension
- How to clean and maintain your AEG dishwasher
- Dishwasher detergent dispenser does not fully open or does not open
- How does the AirDry function in dishwashers work
- Dishwasher - Why should I use Rinse Aid?
- AEG Dishwasher leaking