Oven displays error message C1, C2, C3, C4

Issue

Oven shows error codes C1, C2, C3 or C4 on the display when selecting pyro clean function

Applies to

• Built-In Oven

Solution

C1 – Indicates: The Telescopic Rails (Pictured below) have not been removed before running the Pyro Clean Setting. Only applies to Pyro product

• Remove the telescopic rails, the shelves and the removable side rails from the oven (these can be washed separately with a soft cloth and mild detergent).
• Activate the Pyro Clean setting with the shelves and accessories removed.

C2 – Indicates: The Food Sensor (pictured below) is connected while trying to activate the Pyro Clean setting.

• Disconnect the food sensor from the oven (the socket is on the top right inside the oven, pictured below).
• Activate the Pyro Clean setting with the food probe disconnected and removed.

C3 – Indicates: The door is open, or slightly open while trying to activate the Pyro Clean Setting.

Ensure the oven door is closed before activating the Pyro Clean Setting

C4 – Indicates: The Steam Bake Button is activated while trying to run the Pyro Clean setting. You will know the Steam Bake button is activated as the small light in the button will be lit.

• Press the Steam Bake Button to disengage it (the light in the Steam Bake button will turn off).
• The Pyro Clean setting can now be activated.

Contact an Authorized Service Centre.

If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.

AEG Book a Service

Electrolux Book a Service