Tumble dryer emits unpleasant odour
Issue
- How to maintain your tumble dryer
- Tumble dryer emits unpleasant smells
- Laundry smells unpleasant after drying
Applies to
- Heat Pump Dryers
- Condenser Dryers
Solution
- Tumble dryer emits unpleasant smells
- Laundry smells unpleasant after drying
Note: Disconnect the appliance before you clean it.
1. Clean regularly the fluff filter behind the door and heat exchanger located at the bottom of the appliance.
Fluff Filter
Heat Exchanger
Clean the drum
Use a standard neutral soap detergent to clean the inner surface of the drum and drum lifters. Dry the cleaned surfaces with a soft cloth.
Do not use abrasive materials or steel wool to clean the drum.
Keep the door slightly open after each cycle
If the laundry smells unpleasant after drying, this odour may have arisen before drying:
When washing, pay attention to the correct dosage of the detergent.
Wash the laundry at the highest temperature permitted by the care label.
Dry the laundry immediately after the washing cycle has finished.
Was this article helpful?
Related Articles
- Error Code E5A -Tumble Dryer
- Tumble dryer shrinks clothes
- Clothes are too creased after washing cycle completed
- Clothes are too creased after drying in tumble dryer
- Error Code "Err" or 3 lines in the display - - -
- Excessive moisture, on walls and windows where the tumble dryer is located
- Error EH0, EHI, EH2, EH3 Washer, Washer Dryer, Tumble Dryer
- Front load washer or washer dryer displays error EF2, EF3
- Front load washer or washer dryer displays error E10, E11
- Front load washer or washer dryer displays error E20, E21
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.
Related Articles
- Error Code E5A -Tumble Dryer
- Tumble dryer shrinks clothes
- Clothes are too creased after washing cycle completed
- Clothes are too creased after drying in tumble dryer
- Error Code "Err" or 3 lines in the display - - -
- Excessive moisture, on walls and windows where the tumble dryer is located
- Error EH0, EHI, EH2, EH3 Washer, Washer Dryer, Tumble Dryer
- Front load washer or washer dryer displays error EF2, EF3
- Front load washer or washer dryer displays error E10, E11
- Front load washer or washer dryer displays error E20, E21