Dryer - the display shows different running times for the same programme
Issue
- The display of the dryer shows different running times for the same programme
- The actual programme duration differs from the one specified in the user manual
Applies to
- Heat Pump Dryers
- Condenser Dryers
Solution
1. The appliance is working correctly.
The drying duration is calculated according to various parameters, such as:
- ambient temperature
- initial laundry moisture
- load mass and type
The displayed time adjusts to the actual programme duration.
Was this article helpful?
Related Articles
- The door of the washing machine cannot be opened
- Washing machine displays padlock or LOC
- Washing machine’s drain pump filter is jammed, cannot be removed
- Front load washer or washer dryer displays error E10, E11
- Care and cleaning the washing machine’s rubber door seal
- Washing machine or Dryer displays error E90, E91
- Connected appliances - problems with onboarding and Wi-Fi connection
- No water is visible in the drum - Front Load Washer
- Dryer stops after a few minutes of the cycle
- Tumble dryer is leaking
Related Articles
- The door of the washing machine cannot be opened
- Washing machine displays padlock or LOC
- Washing machine’s drain pump filter is jammed, cannot be removed
- Front load washer or washer dryer displays error E10, E11
- Care and cleaning the washing machine’s rubber door seal
- Washing machine or Dryer displays error E90, E91
- Connected appliances - problems with onboarding and Wi-Fi connection
- No water is visible in the drum - Front Load Washer
- Dryer stops after a few minutes of the cycle
- Tumble dryer is leaking