Error EH0, EHI, EH2, EH3 Washer, Washer Dryer, Tumble Dryer
Issue
Washing machine displays error message:
EHO, EHI, EH2, EH3
Solution
EH0 - The mains power supply is unstable.
EH1 - The frequency of power supply is out of range.
EH2 - Supply voltage is too high.
EH3 - Supply voltage is too low.
- Make sure that the mains plug is connected to the mains socket.
- Never use an extension cable to connect appliances.
- Check the power cord / socket integrity.
- Remove the plug from the socket, wait 30 seconds and then plug it in again. After plugging in the appliance, switch it on and select a program.
- Check the power supply by plugging a different product into the same socket.
- Wait until the main supply is stable.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
Was this article helpful?
Related Articles
- Front load washer, washer dryer, vented dryer displays error E40, E41
- Two-Step Start Requirement for Front Load Washers - AEG
- The door of the washing machine cannot be opened
- Washer Dryer displays ‘check air filter’
- Clothes are creased after drying in tumble dryer
- AEG laundry Connectivity – Pair washing machine and tumble dryer - Video
- Tumble dryer damages clothes
- Can I wash shoes in the front load washing machine
- Tumble dryer shrinks clothes
- UPd is displayed in the and buttons are unresponsive
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.