Front Load washer displays error ECE
Applies to
- Front Load Washer
Solution
If an error appears on the display, please follow the initial troubleshooting steps as suggested.
Error ECE - Sensing circuit of Autodosing faulty
Solution: Switch off and switch on again.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Centre.
Was this article helpful?
Related Articles
- The door of the washing machine cannot be opened
- Washing machine displays padlock or LOC
- Washing machine’s drain pump filter is jammed, cannot be removed
- Front load washer or washer dryer displays error E10, E11
- Care and cleaning the washing machine’s rubber door seal
- Washing machine or Dryer displays error E90, E91
- Connected appliances - problems with onboarding and Wi-Fi connection
- No water is visible in the drum - Front Load Washer
- Dryer stops after a few minutes of the cycle
- Tumble dryer is leaking
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.
Related Articles
- The door of the washing machine cannot be opened
- Washing machine displays padlock or LOC
- Washing machine’s drain pump filter is jammed, cannot be removed
- Front load washer or washer dryer displays error E10, E11
- Care and cleaning the washing machine’s rubber door seal
- Washing machine or Dryer displays error E90, E91
- Connected appliances - problems with onboarding and Wi-Fi connection
- No water is visible in the drum - Front Load Washer
- Dryer stops after a few minutes of the cycle
- Tumble dryer is leaking