Hob displays error message E9

Issue

  • Hob displays error message E9 - This indicates a potential issue with the circuit board. A hob reset may resolve the issue.

Applies to

  • cooktop

Solution

Hob displays error code E9 - This indicates a potential issue with the circuit board. A hob reset may resolve the issue.

Disconnect the appliance from power for at least 30 seconds.

Reconnect it and switch it back on.

Note: To reboot the appliance, it is necessary to turn off it from the grid connection and wait 30 seconds before turning it back on.

For built-in appliances, due to the impossibility of disconnecting them from the electrical grid, the appliance must be disconnected through the RCD switch.

Contact an Authorized Service Centre.

If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.

AEG Book a Service

Electrolux Book a Service

Was this article helpful?