How to descale your AEG Touch Control SteamCrisp Oven | Video
Issue
How to descale your AEG Touch Control SteamCrisp Oven
Applies to
- Built-In Oven
Solution
Descaling Reminders
There are two reminders which prompt you to descale the oven. You cannot disable the descaling reminder.
Soft reminder - Recommends you descale the oven.
Hard reminder - Obligates you to descale the oven.
Important: If you do not descale the oven when the hard reminder is on, the steam functions are disabled.
Note: These reminders activate each time you turn off the oven and will only be re-set after a descaling function has been performed.
This video provides a step-by-step guide on how to descale your AEG Touch Control SteamCrisp Oven
Intro and getting started
Step 1: Removing accessories
Step 2: Oven descaling settings
Step 3: Descaling detergent & water
Step 4: Start the descaling process
Step 5: Rinsing water drawer & tray
Step 6: The rinse phase
Removing tray and replacing oven accessories and Additional info
Was this article helpful?
Related Articles
- Hob displays error message E8 / E822
- How to clean Saphirmatt Induction hob
- Stains or marks on SaphirMatt cooktop – Cleaning advice
- Discoloured marks or bubbles ceramic glass cleaning tips
- Food Sensor/probe temperature setting not displayed
- Oven displays error F101 or F102
- Oven Child Lock - Turning On and Off AEG
- Oven displays error message “REMOVE FOOD PROBE”
- Burner not lighting, holding flame, staying alight or flame lifting.
- The drawer under induction hob gets hot