Microwave will not switch or cannot set a function
Issue
Microwave cannot switch on/switch off or set function
Applies to
- Microwave Combination Oven
Solution
The appliance does not work, display is off
Isolation switch is off - Switch on the isolation switch
Faulty circuit breaker - Check that the circuit breaker for the appliance is on.
Power cut - Check whether the kitchen light works.
The appliance does not work, and a padlock symbol appears in the display panel.
Childproof lock is active - Deactivate the childproof lock
The appliance does not work, and 0:00 is in the display panel.
Reset the clock, set time.
A particular operating mode or power level cannot be set.
The temperature, power level or combined setting is not possible for this operating mode. Choose permitted setting.
The microwave will not switch on.
Door not fully closed.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
AEG Book a Service
Electrolux Book a Service
Was this article helpful?
Related Articles
- Induction Cooktop switched itself off
- Oven displays error F111 when selecting Food Sensor Probe function
- Oven displays error F239
- The drawer under induction hob gets hot
- How to calibrate the AEG induction cooktop food sensor probe
- After a short power failure, Demo appears on the display and my oven will not heat up - AEG
- Discoloured marks or bubbles ceramic glass cleaning tips
- Error F on AEG electronic gas on glass hob and will not ignite
- Microwave Care and Cleaning Maintenance
- Burner not lighting, holding flame, staying alight or flame lifting.
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.