UPd is displayed in the and buttons are unresponsive
Issue
Tumble dryer displays UPd and all buttons are inactive, except the Start/Pause.
Applies to
- Heat Pump Dryers
- Condenser Dryers
- Front load Washer
- Front load washer Dryer
Solution
The App may propose an update for downloading new features. The update is accepted via App only.
If a programme is running, the App notifies that the update will start at the end of the programme. During the update, the appliance shows UPd in the display.
The appliance will be usable again at the end of the update, without any notification about successful update.
The appliance downloads the APP updates at the end of a load cycle
- Wait until the update process is complete.
- If you deactivate the appliance during update, it resumes when you activate the appliance again
Was this article helpful?
Related Articles
- The door of the washing machine cannot be opened
- Washing machine displays padlock or LOC
- Washing machine’s drain pump filter is jammed, cannot be removed
- Front load washer or washer dryer displays error E10, E11
- Care and cleaning the washing machine’s rubber door seal
- Washing machine or Dryer displays error E90, E91
- Connected appliances - problems with onboarding and Wi-Fi connection
- No water is visible in the drum - Front Load Washer
- Dryer stops after a few minutes of the cycle
- Tumble dryer is leaking
Related Articles
- The door of the washing machine cannot be opened
- Washing machine displays padlock or LOC
- Washing machine’s drain pump filter is jammed, cannot be removed
- Front load washer or washer dryer displays error E10, E11
- Care and cleaning the washing machine’s rubber door seal
- Washing machine or Dryer displays error E90, E91
- Connected appliances - problems with onboarding and Wi-Fi connection
- No water is visible in the drum - Front Load Washer
- Dryer stops after a few minutes of the cycle
- Tumble dryer is leaking