Washing machine does not start
Issue
- Machine does not start
Applies to
- Front Load Washer
- Front Load Washer Dryer
Solution
Possible Causes
-The door has not been closed. (Error code: E40) - Close the door firmly
-The plug is not properly inserted into the power socket - Insert the plug into the power socket.
-There is no power at the socket - Plug an appliance into the socket to check if there is power at the socket.
-The Start/Pause touchpad has not been pressed - Press the Start/Pause touchpad.
-The “Delay End” has been selected - If the laundry are to be washed immediately, cancel the “Delay End”.
-Child lock is on. Disable child lock and press Start to start the cycle then enable Child lock again
The Main supply is unstable. (If EH0 appears on the display.) - Wait until the main supply is stable. Appliance will start automatically.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
AEG Book a Service
Electrolux Book a Service
Was this article helpful?
Related Articles
- AEG Universal Dose drawer for capsules – user instruction Video
- Connected appliances - problems with onboarding and Wi-Fi connection
- Drying Rack – How to install and use drying rack program
- No water is visible in the drum - Front Load Washer
- Washing machine or Dryer displays error E90, E91
- The door of the washing machine cannot be opened
- Can the washing machine's door be reversed?
- Care and cleaning the washing machine’s rubber door seal
- Heat Pump dryer not drying, not drying properly, too long drying
- Tumble Dryer noisy drum / knocking noise during drum rotation
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.