Why does my washing machine or tumble dryer program end / finish time change and vary?
Issue
- Why does my washing machine, tumble dryer or washer dryer program end time change and vary
Applies to
- Front Load Washer
- Front Load Washer Dryer
- Heat Pump Dryer
- Condenser Dryer
Solution
Every wash is different and our machines offer bespoke results. Think of the programme time first presented as a "best guess".
The sensors in the machine after approximately 15 minutes will start to calculate if the wash needs a little longer or if it can save time and energy but not over washing unnecessarily and reducing the time.
The washing machine automatically adjusts the program duration to the amount of washing. The sensor also measures how dirty your laundry is. As soon as the detection is complete, the "kg" indication disappears. You now see the shortened program duration; the washing program starts. Every AEG washing machine has a ProSense load sensor.
As soon as you press the start button, the washing machine weighs how much laundry is in the drum. The drum rotates a few times while "kg" flashes in the display. And the calculating sensors have started to measure and make their calculations.
Was this article helpful?
Related Articles
- Washing machine displays padlock or LOC
- AEG Home App Download Installing and Configuring
- AEG Universal Dose drawer for capsules – user instruction Video
- Washing machine does not spin
- Front load washer or washer dryer displays error E20, E21
- Heat Pump dryer not drying, not drying properly, too long drying
- The door of the washing machine cannot be opened
- Washing machine’s drain pump filter is jammed, cannot be removed
- Connected appliances - problems with onboarding and Wi-Fi connection
- Care and cleaning the washing machine’s rubber door seal
Related Articles
- Washing machine displays padlock or LOC
- AEG Home App Download Installing and Configuring
- AEG Universal Dose drawer for capsules – user instruction Video
- Washing machine does not spin
- Front load washer or washer dryer displays error E20, E21
- Heat Pump dryer not drying, not drying properly, too long drying
- The door of the washing machine cannot be opened
- Washing machine’s drain pump filter is jammed, cannot be removed
- Connected appliances - problems with onboarding and Wi-Fi connection
- Care and cleaning the washing machine’s rubber door seal