---C error code
Issue
---C error code displays on the User Interface
The ‘Function’ selector must be in the ‘Off’ position when reenergizing (or after a power failure) the appliance and left in the ‘Off’ position for the full start up sequence, failure to do so will result in a ---C
Applies to
- Built In Oven
- Freestanding ovens
Solution
Select the 'Off' position on the 'Function' switch and re-set the power and wait until the start-up sequence is complete.
Was this article helpful?
Related Articles
- Oven displays error message C1, C2, C3, C4
- Oven displays error F104, F04, F105, F05
- Oven displays error F101 or F102
- How to remove oven shelf supports for cleaning
- Oven cooling fan runs all the time
- The ignition on my gas hob keeps sparking
- Oven displays error F908, F113
- The Hob2Hood function does not work with the cooker hood
- Error F E6 or E7 on AEG electronic gas on glass hob and will not ignite
- Discoloured marks or bubbles ceramic glass cleaning tips
Related Articles
- Oven displays error message C1, C2, C3, C4
- Oven displays error F104, F04, F105, F05
- Oven displays error F101 or F102
- How to remove oven shelf supports for cleaning
- Oven cooling fan runs all the time
- The ignition on my gas hob keeps sparking
- Oven displays error F908, F113
- The Hob2Hood function does not work with the cooker hood
- Error F E6 or E7 on AEG electronic gas on glass hob and will not ignite
- Discoloured marks or bubbles ceramic glass cleaning tips