Clothes are creased after drying in tumble dryer
Issue
clothes are creased and wrinkled after drying in tumble dryer
Applies to
- Heat Pump Dryer
- Condenser Dryers
- Washer Dryer
Solution
- Improper sorting of the wash load.
For example, loading large, heavy items with lightweight, delicate items.
Do not dry large and small items together. Small items can be trapped inside the large items and remain wet.
- Prepare the laundry load after washing
Very often the clothes after washing cycle are kneaded and tangled altogether. Drying kneaded and tangled clothes is inefficient. To assure proper air flow and even drying it is recommended to shake and load one by one the clothes to the tumble dryer.
- Use of incorrect drying cycles.
Always set the program suitable for the type of laundry.
- Too many items in the Dryer.
Do not exceed the maximum load stated in the programs chapter or shown on the display
- Leaving clothes in the Dryer after tumbling stops.
If you cannot remove your laundry immediately after the end of the drying programme, select the anti-crease option. After drying phase drum rotates from time to time to prevent creases. Laundry can be removed during the anti-crease phase.
How to de-wrinkle
If the drying cycle has completed and the fabrics are too creased for any of the above reasons explained:
- Selected dryer models have a steam program function.
Decreases or removes creases. Makes the pieces of clothing more flexible.
The pieces of clothing after steam program are easy to iron.
At the end of the steam cycles clothes come out with a residual humidity appropriate for ironing.
If clothes are not ironed immediately hang them until they are completely dry or select a short time dry function to dry the fabrics and remove immediately once completed
- Selected Front load washers have a vapour refresh option to quickly refresh and de-wrinkle.
Transfer load to washer and select vapour refresh option.
At the end of the steam cycles clothes come out with a residual humidity appropriate for ironing.
If clothes are not ironed immediately hang them until they are completely dry or select a short time dry function to dry the fabrics and remove immediately once completed.
Front Load Vapour Refresh