Food Sensor/probe temperature setting not displayed
Issue
The Food Sensor/probe temperature setting is not being displayed
Applies to
- Built-In Oven
Solution
Note: The Food Sensor/probe temperature will not be displayed until the oven is at the desired temperature. Once the oven is at the desired temperature, the Food Sensor/probe temperature will cycle between the desired food core temperature and the actual food core temperature.
- Only use the Food Sensor/probe supplied or the correct replacement parts.
- Ensure Food Sensor/probe plug is fully inserted into the socket on the front panel.
Ensure food is fully defrosted.
Food must be completely defrosted when inserting the Food Sensor/probe. If the food is too cold, the Food Sensor/probe function will not work.
Was this article helpful?
Related Articles
- Oven displays error message C1, C2, C3, C4
- Oven displays error F104, F04, F105, F05
- Oven displays error F101 or F102
- How to remove oven shelf supports for cleaning
- Oven cooling fan runs all the time
- The ignition on my gas hob keeps sparking
- Oven displays error F908, F113
- The Hob2Hood function does not work with the cooker hood
- Error F E6 or E7 on AEG electronic gas on glass hob and will not ignite
- Discoloured marks or bubbles ceramic glass cleaning tips
Related Articles
- Oven displays error message C1, C2, C3, C4
- Oven displays error F104, F04, F105, F05
- Oven displays error F101 or F102
- How to remove oven shelf supports for cleaning
- Oven cooling fan runs all the time
- The ignition on my gas hob keeps sparking
- Oven displays error F908, F113
- The Hob2Hood function does not work with the cooker hood
- Error F E6 or E7 on AEG electronic gas on glass hob and will not ignite
- Discoloured marks or bubbles ceramic glass cleaning tips