Hob displays error message E2
Issue
- Hob displays the error message E2
Applies to
- Induction Cooktop
Solution
Error message E2 indicates a fault in the LED lighting of induction cooktops.
Disconnect the appliance from power for at least 30 seconds.
Note: To restart the appliance, disconnect it from the power point and wait 30 seconds before turning it back on.
In the case of built-in appliances, there's no need to physically disconnect the cable - the appliance can be disconnected using the household safety switch.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Centre.
Was this article helpful?
Related Articles
- Oven displays error message C1, C2, C3, C4
- Oven displays error F104, F04, F105, F05
- Oven displays error F101 or F102
- How to remove oven shelf supports for cleaning
- Oven cooling fan runs all the time
- The ignition on my gas hob keeps sparking
- Oven displays error F908, F113
- The Hob2Hood function does not work with the cooker hood
- Error F E6 or E7 on AEG electronic gas on glass hob and will not ignite
- Discoloured marks or bubbles ceramic glass cleaning tips
Related Articles
- Oven displays error message C1, C2, C3, C4
- Oven displays error F104, F04, F105, F05
- Oven displays error F101 or F102
- How to remove oven shelf supports for cleaning
- Oven cooling fan runs all the time
- The ignition on my gas hob keeps sparking
- Oven displays error F908, F113
- The Hob2Hood function does not work with the cooker hood
- Error F E6 or E7 on AEG electronic gas on glass hob and will not ignite
- Discoloured marks or bubbles ceramic glass cleaning tips