How to descale your AEG Command Wheel SteamPro Oven | AEG Video
Issue
How to descale your AEG Command Wheel SteamPro Oven | AEG Video
Applies to
- Built-In Oven
Solution
Descaling Reminders
There are two reminders which prompt you to descale the oven. You cannot disable the descaling reminder.
Soft reminder - Recommends you descale the oven.
Hard reminder - Obligates you to descale the oven.
Important: If you do not descale the oven when the hard reminder is on, the steam functions are disabled.
Note: These reminders activate each time you turn off the oven and will only be re-set after a descaling function has been performed.
This video provides a step-by-step guide on how to descale an AEG Command Wheel SteamPro oven.
Intro and getting started
Step 1: Removing accessories
Step 2: Oven descaling settings
Step 3: Descaling detergent & water
Step 4: Start the descaling process
Step 5: Rinsing water drawer & tray
Step 6: The rinse phase
Removing tray and replacing oven accessories and Additional info
Was this article helpful?
Related Articles
- Oven displays error message C1, C2, C3, C4
- Oven displays error F104, F04, F105, F05
- Oven displays error F101 or F102
- How to remove oven shelf supports for cleaning
- Oven cooling fan runs all the time
- The ignition on my gas hob keeps sparking
- Oven displays error F908, F113
- The Hob2Hood function does not work with the cooker hood
- Error F E6 or E7 on AEG electronic gas on glass hob and will not ignite
- Discoloured marks or bubbles ceramic glass cleaning tips
Related Articles
- Oven displays error message C1, C2, C3, C4
- Oven displays error F104, F04, F105, F05
- Oven displays error F101 or F102
- How to remove oven shelf supports for cleaning
- Oven cooling fan runs all the time
- The ignition on my gas hob keeps sparking
- Oven displays error F908, F113
- The Hob2Hood function does not work with the cooker hood
- Error F E6 or E7 on AEG electronic gas on glass hob and will not ignite
- Discoloured marks or bubbles ceramic glass cleaning tips