Oven displays error F111 when selecting Food Sensor Probe function
Issue
Oven displays error F111 and cannot start the oven function
Applies to
- Built-In Oven
Solution
F111- indicates: The Food Sensor probe is faulty or is not connected properly
1. Connect the Food Sensor Probe properly.
2. Inspect the food probe for signs of damage.
3. Replace the faulty Food Sensor Probe.
Note: ensure the cleaning instructions are followed to ensure accidental damage.
- Clean the Food Sensor/probe after each use and let it dry. Use a soft cloth with warm water and a cleaning agent. Only clean the sensor/probe end and not the plug
4. Contact an Authorized Service Center.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
AEG Book a Service
Electrolux Book a Service
Was this article helpful?
Related Articles
- Oven displays error message “REMOVE FOOD PROBE”
- Burner not lighting, holding flame, staying alight or flame lifting.
- The drawer under induction hob gets hot
- Oven displays error F908, F113
- How to calibrate the AEG induction cooktop food sensor probe
- Oven displays error F101 or F102
- Why is the microwave taking longer to heat food?
- Oven Child Lock - Turning On and Off AEG
- After a short power failure, Demo appears on the display and my oven will not heat up - AEG
- The Hob2Hood function does not work with the cooker hood
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.