Oven displays Error F131, F144, F508
Issue
Oven displays Error F131, F144, F508 on Steam function setting
Applies to
- Built-In Oven
Solution
F131 -Indicates: The temperature of the steamer sensor is too high.
- Turn the oven off and wait until it cools down. Turn the oven on again.
F144 – Indicates: The sensor in the Water drawer cannot measure the water level.
- Empty the Water drawer and refill it.
F508 – Indicates: The Water drawer does not work properly.
- Turn the oven off and on.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
AEG Book a Service
Electrolux Book a Service
Was this article helpful?
Related Articles
- Oven displays error message “REMOVE FOOD PROBE”
- Burner not lighting, holding flame, staying alight or flame lifting.
- The drawer under induction hob gets hot
- Oven displays error F908, F113
- How to calibrate the AEG induction cooktop food sensor probe
- Oven displays error F101 or F102
- Why is the microwave taking longer to heat food?
- Oven Child Lock - Turning On and Off AEG
- After a short power failure, Demo appears on the display and my oven will not heat up - AEG
- The Hob2Hood function does not work with the cooker hood
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.