Tumble dryer displays error message E5A
Issue
Tumble dryer displays error message E5A
Applies to
- Heat Pump Dryers
- Condenser Dryers
Solution
E5A - Appliance motor overloaded.
Check the load size, to ensure the machine is not overloaded.
Check load size is correct for the cycle selection and reload the laundry.
Note: The maximum weight refers to dry items.
Remove the laundry from the drum.
Set the program and re‐ start the cycle.
Contact an Authorized Service Centre.
If the above steps don't resolve the issue, we recommend contacting an Authorized Service Center.
AEG Book a Service
Electrolux Book a Service
Was this article helpful?
Related Articles
- The door of the washing machine cannot be opened
- Washing machine displays padlock or LOC
- Washing machine’s drain pump filter is jammed, cannot be removed
- Front load washer or washer dryer displays error E10, E11
- Care and cleaning the washing machine’s rubber door seal
- Washing machine or Dryer displays error E90, E91
- Connected appliances - problems with onboarding and Wi-Fi connection
- No water is visible in the drum - Front Load Washer
- Dryer stops after a few minutes of the cycle
- Tumble dryer is leaking
In Warranty Service & Repair
Need to arrange a repair technician visit? Repairs under warranty are free of charge and we are here to support you after your warranty has expired. Authorised Technicians and genuine parts for complete peace of mind.
Related Articles
- The door of the washing machine cannot be opened
- Washing machine displays padlock or LOC
- Washing machine’s drain pump filter is jammed, cannot be removed
- Front load washer or washer dryer displays error E10, E11
- Care and cleaning the washing machine’s rubber door seal
- Washing machine or Dryer displays error E90, E91
- Connected appliances - problems with onboarding and Wi-Fi connection
- No water is visible in the drum - Front Load Washer
- Dryer stops after a few minutes of the cycle
- Tumble dryer is leaking