Tumble dryer displays error message "Err" or 3 lines in the display
Issue
Tumble dryer displays error message "Err" or " - - - ".
Applies to
- Heat Pump Dryers
- Condenser Dryers
Solution
Indicates a wrong selection with the selected program.
Make sure that the additional options selected are suitable for the program selected.
- Change a program
- 1. Press the on/off button to deactivate appliance
- 2. Press the on/off button to activate the appliance.
- 3. Set the program.
Refer to the options table in the user manual.
To find out more about your specific model download your user manual.
Was this article helpful?
Related Articles
- AEG Universal Dose drawer for capsules – user instruction Video
- Connected appliances - problems with onboarding and Wi-Fi connection
- Drying Rack – How to install and use drying rack program
- No water is visible in the drum - Front Load Washer
- Washing machine or Dryer displays error E90, E91
- The door of the washing machine cannot be opened
- Can the washing machine's door be reversed?
- Care and cleaning the washing machine’s rubber door seal
- Heat Pump dryer not drying, not drying properly, too long drying
- Tumble Dryer noisy drum / knocking noise during drum rotation